2005-2015 Tacoma / Access Cab & Double Cab Short Bed
2005-2015 Tacoma 79″ Bolt On Sliders
$745.00 – $1,095.00
2005-2015 Toyota Tacoma 79 Bolt On Sliders: 79″ Tapered Kickout Bolt On Slider
Direct Bolt on sliders, no drilling required.** These will fit Double Cab Short Bed and Access Cab models only.
Hybrid Tubing configuration, 2.0″ x .120″ wall Square HREW, Main tube and Mounting legs. Outer tube is 1.75″ x .120″ wall Round DOM. Mounting Plates are 1/4″ Steel
Rock Sliders bolt on directly into existing frame holes (No drilling required!!)
79″ Designed for DCSB or Access Cab Long Bed (Double Cab Long Bed requires 90″)
Weighs approximately 100# per set
Top Plates and Powder Coating are extra available options
2005-2015 Tacoma 79 Bolt On Sliders
Current Lead time: 12-14 weeks (Lead times are approximate)
**4WD Models only** | **4 cyl. Models will require modification**
- 2005-2015 Tacoma / Access Cab & Double Cab Short Bed
2005-2015 Tacoma 79 Bolt On Slider INSTALLATION
Sliders should be prepped and painted or powder coated prior to installation for best results. Mask mounting areas from paint or powder. Please Note: Certain model years may have a frame rivet or two toward the rear that needs to be ground flush prior to installation. Certain 2016+ models will need to drill (2) holes per side for mounting, do to variations from Toyota Factories. The driver’s side of the frame has 2 brake line clips that must be pulled away from the frame to allow for the large front nut plate to be inserted into the forward boxed area of the frame. The rear brake line clip will be reinstalled using the supplied 1″ brake line spacer. This will be bolted to the frame using the hole that is was clipped into and the supplied ¼” screw and washer.