2005-2015 Tacoma / Access Cab & Double Cab Short Bed
2005-2015 Tacoma 79″ Weld On Sliders
$495.00 – $785.00
22005-2015 Toyota Tacoma 79 Weld On Sliders: Sliders 79″ Tapered Kickout Weld On
Hybrid Tubing configuration, 2.0″ x .120″ wall Square HREW, Main tube and Mounting legs. Outer tube is 1.75″ x .120″ wall Round DOM. Mounting Plates are 1/4″ Steel
79″ Designed for DCSB or Access Cab Long Bed (Double Cab Long Bed requires 90″)
Weighs approximately 80# per set
Top Plates and Powder Coating are extra available options
These will fit Double Cab Short Bed and Access Cab models only.
2005-2015 Tacoma 79 Weld On Sliders
Current Lead time: Approximately 10-11 bare, 12-13 weeks with powder coating | Installation Instructions
- 2005-2015 Tacoma / Access Cab & Double Cab Short Bed
2005-2015 Tacoma 79 Weld On Sliders INSTALLATION
Prior to welding the negative terminal on the battery must be removed. Sliders should be prepped and painted or powdercoated prior to installation for best results. Mask mounting areas from paint or powder. Sliders should be “mocked up” in position and frame should be marked. Paint on frame needs to be ground off to expose bare metal for welding. The sliders should be positioned minimum ½” from the lower pinch weld to allow for body flex without contact. Certain vehicles may have frame assembly rivets that need to be ground flush prior to installation. Ensure that you have a proper ground for the welder prior to welding. Only qualified personnel should weld onto the vehicle and proper safety equipment must b e employed. After welding is complete the welded areas need to be cleaned and painted. The paint should be reapplied regularly as necessary depending on road conditions and quality of paint.