2005+ Tacoma / All Configurations
2005-2017 Tacoma Steel Rear Skid (exhaust reroute)
$295.00 – $335.00
2005-2017 Toyota Tacoma Steel Rear Skid for exhaust reroute (flat belly)
This exhaust reroute version of the Pelfreybilt Rear Skid is completely flat which provides additional clearance over the stock exhaust version. This Skid provides protection of the Transfer Case. This skid requires rerouting of the exhaust crossover for proper fitment on V6 4×4 models. Rerouting is not required on 4cyl models
Skids are laser cut & formed from 3/16″ steel
Rear Transfer Skid requires drilling two 1/2″ holes into bottom of frame.
2005-2017 Tacoma Steel Rear Skid
IN STOCK | Installation Instructions
- 2005+ Tacoma / All Configurations
2005-2017 Tacoma Steel Rear Skid PLATE INSTALLATION
With the 3/8 bolts slightly protruding beyond the mid-skid lift the transfer case skid with a jack and locate it on the 4 bolts. Add nuts and washers and tighten. At this point these bolts should be snugged down to locate rear holes for drilling. The two rear holes should be drilled at this point using a 17/32″ drill. Using the skid as a guide drill thru the frame with the 17/32″ drill. We suggest using cutting oil. The frame is thick and difficult to drill thru, using a jack to apply additional force may be handy, do so with extreme caution. After holes are drilled install supplied ½-13 x 1-1/4″ bolts fr om the bottom and put flat and lock washer on top, thread nut on and torque down.