2005+ Tacoma / All Configurations
2005-2017 Tacoma Steel Rear Skid (stock exhaust)
$295.00 – $335.00
2005-2017 Toyota Tacoma Steel Rear Skid: Rear Skid Steel for STOCK exhaust
This stock exhaust version of the Pelfreybilt Rear Skid has a drop down area that covers the exhaust crossover on V6 4×4 models. This skid provides coverage of the Transfer Case
Skids are laser cut & formed from 3/16″ steel
Rear Transfer Skid requires drilling two 1/2″ holes into bottom of frame.
2005-2017 Tacoma Steel Rear Skid
IN STOCK | Installation Instructions
- 2005+ Tacoma / All Configurations
2005-2017 Tacoma Steel Rear Skid PLATE INSTALLATION
With the 3/8 bolts slightly protruding beyond the mid-skid lift the transfer case skid with a jack and locate it on the 4 bolts. Add nuts and washers and tighten. At this point these bolts should be snugged down to locate rear holes for drilling. The two rear holes should be drilled at this point using a 17/32″ drill. Using the skid as a guide drill thru the frame with the 17/32″ drill. We suggest using cutting oil. The frame is thick and difficult to drill thru, using a jack to apply additional force may be handy, do so with extreme caution. After holes are drilled install supplied ½-13 x 1-1/4″ bolts fr om the bottom and put flat and lock washer on top, thread nut on and torque down.