2014-2016 4Runner / Pro Edition
2014-2017 4Runner Aluminum Front Plate Bumper (SR5/Trail/Limited/Off-Road)
$1,995.00 – $2,195.00
2014-2017 Toyota 4Runner Aluminum Front Plate Bumper (SR5/TRAIL/LIMITED EDITIONS) with square fog cutouts & 30″ LED bar cutout & LED cover
This Pelfreybilt Front Bumper comes standard with winch mounting provisions
All bumpers come standard with:
_1/4″ Steel Formed Reinforcement Brackets
_ 3/4″ D-ring mounts.
_ 30″ Single Row LED light bar and fog light cutouts.
_ 30″ light bar cutout filler plate included with purchase
2014-2017 4Runner Aluminum Front Plate Bumper
Current Lead time: 2-3 weeks BARE, 3-5 weeks POWDER COATED (Lead times are approximate)
- 2014-2016 4Runner / Pro Edition
2014-2017 4Runner Aluminum Front Plate Bumper Installation instruction
Start by removing the factory bumper. The bumper has several bolts and clips at the bottom and in the wheel wells; be sure all clips and bolts are removed and then the bumper will pop out toward the front. NOTE: The black plastic “click in” pieces that hold the factory plastic bumper should be removed, they are located at the outermost part of the fenders near the headlights. The black plastic radiator shrouds will also need to be removed. Next step is to remove the factory aluminum crash bumper, it is held on by 8 bolts, 3 on each side. Save the bolts, they will be reused. Before mounting all of your accessories onto the bumper it is a good idea to do a test fit. With two people minimum, carefully lift the bumper up onto the studs, use caution not to hit the fend ers with the bumper. 3 people are ideal, two to lift and one to start the bolts. Check alignment, the bumper can be raised and lowered to fit each different truck. The tilt of the bumper can be manipulated if needed by adjusting the location of the L – Sharp reinforcement bracket.