2005+ Tacoma / All Configurations
$245.00 – $295.00
2016-2017 Toyota Tacoma Pro Aluminum MID Skid: Mid Skid Aluminum “PRO”
This skid is designed to work with the Factory TRD Pro IFS skid
This Mid Skid protects the Transmission and serves as a theft deterrent for the Catalytic converters. Removal of the Catalytic Converter Guards is required for installation. This skid replaces them.
Skids are laser cut & formed from 1/4″ aluminum.
2016-2017 Tacoma Pro Aluminum MID Skid
Current Lead time: 3-4 days when in stock, 1-2 weeks POWDER COATED (Lead times are approximate)
- 2005+ Tacoma / All Configurations
2016-2017 Tacoma Pro Aluminum MID Skid Installation
You will need to remove the cross – member tubes that cover the Catalytic Converters. This skid provides the protection/theft prevention needed for the Catalytic Converters. Remove 10mm nuts only from 4 bolts (14 mm socket) on transmission cross – member. The nuts should be to rear of truck, if the nuts are to the front, remove bolts one at a time, and put them thru so that the nuts are on the back of the cross – member. If adding a transfer case skid remove one at a time and replace with supplied 3/8 – 16 x 5″ grade 8 bolts and washers. Lift Mid – skid with a jack and align the front holes with the large holes in the cross – member, directly behind the factory “Pro” front skid . The supplied hardware will attach the skid through the three holes, using the supplied nut plate. Lift the rear of the skid to locate onto the factory cross – member bolts. Final tightening: Work your way around the skid tightening up the bolts evenly.